Sunday, May 23, 2021

CHAIN BLOCK DO’S & DONT'S

 CHAIN BLOCK DO’S & DONT'S

Do’s

·       Ensure that the chain block is in sound condition and good working order. Take action for immediate repair or replacement of damaged parts. Use recommended parts only. The use of un-authorised parts may be dangerous and will invalidate the warranty.

·       Ensure the support for the chain block is capable of withstanding a load of at least 1½ times the chain block safe working load.

·       Keep the chain block clean for the best and safest performance.

·       Locate the chain block in a suitable, well-lit work area.

·       Keep work area clean and tidy and free from unrelated materials.

·       Ensure all non-essential persons keep a safe distance whilst the chain block is in use.

·       Ensure load sling(s) are fully engaged in load hook and that hook safety bar is in the closed position.

·       Raise and lower in a smooth, controlled manner and DO NOT shock load the chain block by allowing the attached load to fall freely, even for very short distances.

·       Check the brake operation by stopping when the load has been raised a short distance (100mm) and ensuring that it is held with no downward creep.

·       DANGER: Use the chain block for lifting only, NOT for supporting the lifted load.

·       Use a qualified person to lubricate and maintain the chain block.

·       Store chain block in a dry and weather proof area when not in use.

 Don’ts

·       DO NOT operate the chain block if damaged.

·       DO NOT allow untrained persons to operate the chain block.

·       DO NOT exceed the rated capacity (safe working load) of the chain block.

·       DO NOT raise or lower the load with jerky or abrupt movements of the hand chain.

·       DO NOT attempt to lift a load if the load chain is kinked or knotted.

·       DO NOT try to raise a load with two, or more, chain blocks - use a single block of adequate capacity.

·       DO NOT use the chain block to drag the load across the floor. Always position the load directly below the block.

·       DO NOT wrap the load chain around the load - always us separate, suitable, slings/chains/ropes of the correct capacity.

·       DO NOT allow anyone to stand or pass beneath the raised load.

·       DO NOT use the chain block for purposes other than that for which it is intended.

 

1 comment:

  1. Thanks for sharing such an informative post. Caliber Pro leads the way in material handling equipment in India with utmost safety standards. Get in touch for the best services at affordable prices.
    Chain Pulley Block

    ReplyDelete

Popular Posts